English | Chinese Traditional | Chinese Simplified

Products

Industrial Parts
Energy Harvesting Piezo Material
Consumer Products
Automobile Parts and Consumer Products

Online Customer Service

Send me an email

Product Type: Helimorph Actuator

Special Features

  • Displacement > 300 microns
  • Dynamic tilt < 0.1°
  • Positional repeatability < 5 microns
  • Operating voltage 2.8V to 5.5V
  • Output voltage +80V to -80V
  • Control I2C
  • Focusing power 5Mw
  • Focus cycle time 0.7S (15 fps image sensor)
  • Application

    Auto Focus Module

    Product Specification

    Actuator Specification

    Model Number DimensionElectrical PropertiesDisplacement Mechanical Strength
    Outer DiameterInner DiameterTube DiameterOperating max. positive drive voltageOperating max. negative drive voltage Driving Voltage
    V
    Weibull
    Modulus
    Failure
    Force
    mmmmmmVVμm noneN
    X110110.85 ~ 11.30 8.50~ 8.751.0585-85 >725±80V100.8
    X09018.70 ~ 9.206.70 ~ 6.901.0566-66>625±66V 100.7
    X09028.70 ~ 9.206.70 ~ 6.901.0533-33>625±33V 100.7
    X08018.24 ~ 8.576.31 ~ 6.491.0566-66>530±33V 100.7
    X07056.55 ~ 7.104.60 ~ 4.800.9566-66>300±33V 100.7
    X07046.55 ~ 7.104.60 ~ 4.800.9566-66>300±33V 100.7

    Environmental and Reliability Specification

    TestTemperatureHumidityTime
    (hours)
    Remarks
    Cold storage-40°CNormal 300
    Hot storage+85°CNormal 300
    Hot storage high % RH+60°C90%RH 300
    Thermal shocking+85° to –40°C Normal500 cyclesRamp rate = 3°C.min-1
    Dwell at temperature = 30 mins
    Operating cold temp–30°CNormal 24Drive Voltage = +80V to -80V
    Frequency = 1Hz
    Operating high temp+ 70°CNormal 24Drive Voltage = +80V to -80V
    Frequency = 1Hz
    Operating high temp. & high humidity+ 60°C90%RH 24Drive Voltage = +80V to -80V
    Frequency = 1Hz
    Static voltage at high temp. & high humidity+ 60°C90%RH 10 cyclesVoltage Cycle = 80V 5 minutes, 0V 5 minutes
    Vibration test on packaged devicesNormalNormal 6Vibration frequency = 10 to 500 Hz
    Acceleration = 5G (or 0.7mm peak to peak amplitude)
    Shock test on packaged devicesNormalNormal N/aAcceleration = 1000 m.s-2 (102G)
    Duration = 6 msec
    Direction = XYZ (and their opposites)
    three times in each axis.
    Drop test on packaged devicesNormalNormal N/aHeight of drop = 1m
    Floor surface = concrete or steel
    Number of drops = 3

    Copyright © 2008 Sunnytec.com.tw,All rights reserved
    No 9, Luke 1st. Rd., LujhuTownship, Kaohsiung Country, Taiwan, R.O.C
    TEL:+886-7-6955079 FAX:+886-7-6955055